Galcon 9001d e manual3/16/2023 Set the current minute with the aid of or. Press and the minute digits will start blinking. Set the current hour with the aid of or (note: AM and PM designation).ģ. Press and the hour digits will start blinking. Week must be entered using the 4 programmingĢ. To enable the timer to operate the irrigation systemĪt the required time, the current time and day of the To enable the irrigation timer to operate the irrigation system at the desired intervals or times, the current time and day of the week must be set as shown:ħ.1 SETTING THE CURRENT TIME & DAY OF THE WEEK After 10 minutes the timer will implement 5-minute irrigation every 24-hours (default mode). Emergency Irrigation: After inserting the battery, if no buttons are pressed the clock will blink continuously.If the last digit (programmed feature) stops blinking before programming is complete, press to restart and continue the process. Display digits will stop blinking after 40 seconds.If no changes are implemented, the timer display will always revert to the main screen (clock).Parameter Selection: Use to select a value that can be changed. increase the minute and hour).ĭata Decrement (decrease): Use to lower the value of the selected program feature (e.g. Programming Mode: Use to accept and/or select the desired programming mode.ĭata Increment (increase): Use to raise the value of the selected program feature (e.g. The digital timer is programmed with the aid of 4 buttons. Connect any other components with female hose thread to the outlet side. Then screw the timer to the male hose end by attaching the side with the 3/4” swivel hose thread to the faucet/spigot or garden hose. Make sure the screen washer is in place inside the swivel. The 9001 timer can be attached to a hose end such as a faucet/spigot or garden hose. Use 9-volt alkaline batteries only (not included). When changing the battery make sure the battery compartment stays dry. Insert the battery and press the cover to lock.Connect the 9-volt battery to the battery connector (see male/female connectors).Hold the timer with the battery compartment facing up.3/4” female swivel hose thread faucet/tap adapter If you have any questions, please call our customer service line 1-80.ġ. Please take the time to read through the enclosed instructions and follow them step-by-step. After reading the manual and getting familiarized with the basic functionality of the device, use the manual as a reference for less common tasks in the future. This manual is designed to help set up the 3/4" Hose End Timer. Thank you for purchasing DIG's 3/4" Hose End Timer.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |